Q-See QC804 User Manual
Also see for QC8016: User manual
                                          | |
Contents
| 
54 55In Tour mode, you will see an icon in the upper right corner of the display which allows you tocontrol the tour by right-clicking upon it. Clicking upon the icon will cause the tour to pause orresume.Window switching modeenabledWindow switching modestoppedCAM1CAM5CAM9CAM13CAM2CAM6CAM10CAM14CAM3CAM7CAM11CAM15CAM4CAM8CAM12CAM162012-02-24 10:06:56PICTURE 4-25PICTURE 4-26 PICTURE 4-27PICTURE 4-28DEFAULTSelect allGENERALSCHEDULENETWORKDETECTDISPLAYREMOTE DEVICEENCODERS232ALARMPAN/TILT/ZOOMChannel NameOK CancelPlease select setting entries that you want to defaultWARNING! Language, time display mode, video format, IP address, and useraccount will not retain your settings after being reset back to default values!DEFAULTThe options in this window will allow you to return various settings back to their defaultconfiguration.The settings that will be changed areself-explanatory.4.5 REMOTE DEVICEWhile cameras connected directly to the NVR through the POE ports will automaticallyconnect and display video, remote cameras connected to your system must be locatedand added manually. This can be done through the process described in Section 2.4 IPCameras at the beginning of this manual or through the Remote Device window.Use of remote devices requires that your NVR is connected to a router. These devices canbe IP cameras or even QC-series DVRs. If you intend to connect to devices that are locatedoutside of your local network, then this router must be able to access the Internet. Instructionsfor connecting your system to the Internet are presented in the Remote Monitoring Guidethat also came on the CD with your system. It is also available from our online resource atwww.Q-See.com/Support.Similarly, the remote devices must be able to communicate with the local network or Internet.This will be covered in Chapter 4 of the Remote Monitoring Guide as well.This window can be reached by clicking onthe Remote Device icon in the Main menu...MAIN MENUSEARCH INFO SETTINGADVANCED BACKUPREMOTE DEVICESHUTDOWN...or through the Shortcut menu by right-clicking on the screen and selecting RemoteDevice.View 1View 4View 8View 9View 16Pan/Tilt/ZoomColor SettingSearchRecordRemote DeviceAlarm OutputMain Menu |
Related manuals for Q-See QC8016
manualsdatabase
Your AI-powered manual search engine