Q-See QR414 User Manual

Also see for QR414: Quick installation guide Quick installation guide

Q-See QR414 User Manual Manual pdf 33 page image

QR414 User Manual295.3: Menu LockYour DVR is equipped with a Menu Lock feature to ensure that your settingsand configurations are tamper-proof. Right clicking on your mouse andclicking on [Menu] the [Lock] from the popup menu will lock your DVR and youwill be required to enter a password to unlock this feature as illustrated inPicture 66). Please note that only the System Administrator has full accessand authority over Main Menu operations.5.4: Video SearchRight clicking on your mouse and clicking on the Video Search option from your pop-up menu will allow you to searchthrough your recorded files and playback recordings. For more information on searching through files, refer toSection 5.24.5.5: PTZ ControlAs dicussed in Section 5.2.7.3, you have the ability to connect a PTZ camera to your DVR system. To operate thePTZ camera once you have connected it to your system and configured it correctly following the directions in 5.2.7.3,you will need to access the PTZ Camera interface illustrated in Picture 67. To do this, right click on your mouse andclick on the PTZ option from your pop-up menu. From the PTZ Camera interface, you can Zoom in and out, adjust thecamera Focus and increase or decrease the brightness of your image. Click Z+&Z- keys to zoom In or out, clickF+&F- keys to control camera focus and click I+&I- to adjust the brightness.Cruise SetupOpen the auto cruise function on the PTZ setting menu to configure your auto cruisesettings as illustrated in Picture 68. The functions associated with each of the buttons onthe Cruise Setup interface are as follows:Channel Select: Allows you select the channel with the PTZ camera.Total: Allows you to set the bit quantity.Preset: Saves the preset point. After setting channel and setting the position byadjusting PTZ direction key you click [Set] button to setup the pre-set point. Please notethat you have to click the [Save] button for the set up to be complete.Cur Point: System has default starting (current) cruise point as 01. You can use thisoption to set additional cruise points.Stop Time: Sets the pause time at each stop.GOTO：Allows you to go to specific preset points.Clean: Removes changes you made to the settings.Note: this DVR model supports up to 100 pre-set points but you may be limited to thenumber of pre-set points your PTZ camera allows.(Picture 66)(Picture 67)(Picture 68)