Q-See QSC26404 QH32DVR4C User Manual
                                                                                          | |
Contents
| 
QH32DVR4C User’s Manual675.17 PTZ (Pan, Tilt, Zoom)There is one RS-485 port on the DVR rear panel used for PTZ camera control. You can setupRS-485 parameters to match your PTZ protocol. In main menu, move the “Active Frame” to PTZicon and press【ENTER】key, you will enter into PTZ menu as shown in fig 5.29Fig 5.29 PTZ parameters setupPTZ menu descriptionSelect channel: Select a PTZ camera.RS-485 parameters: Including baud rate, data bit, stop bit, parity, flow control, etc. Theseparameters must be the same as the PTZ Protocol.PTZ address: Each PTZ camera has a different address.PTZ type: DVR supports the following PTZ protocols: YouLi, LinLin-1016, LinLin-820,Pelco-p, DM DynaColor, HD600, JC-4116, Pelco-d WX, Pelco-D, VCOM VC-2000, NetStreamer,SAE/YAAN, Samsung, Kalatel-312, CELOTEX, TLPelco-p, TLHHX-2000, BBV, RM110,KC3360S, ACES, ALSON, INV3609HD, Howell, Tc Pelco P, Tc Pelco D, AUTO-M, AUTO-H,ANTEN, CHANGLIN, DeltaDome, XYM-12, ADR8060, EVI-D30, DEMO-SPEED,DM-PELCO-D, ST832, LC-D2104, HUNTER, A01, TECHYIN, WEIHAN, LG, D-MAX,Panasonic, KTD-348, infinova, PIH-7625, LCU, DennarDome, etc. Other PTZ protocols may beadded with new firmware updates. |
Related manuals for Q-See QSC26404 QH32DVR4C
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine