Q-See QSD2316L User Manual

Also see for QSD2316L: Quick installation guide Quick start guide User manual Setup manual

Contents

Digital Video Recorder User Manual142.5.2 Using MouseIn live view:Click left mouse button on one camera to display full screen. Click again to return to the previous screen display.Click right button to show the control bar at the bottom of the screen as in Fig 2.10 Remote Control. Here are all thecontrols and setup. Click right mouse button again to hide the control bar.In setup:Click left button to enter. Click right button to cancel setup, or return to the previous screen.If want to input the value, move cursor to the button and click. An input window will appear as in Fig 2.10 RemoteControl. It supports numbers, letters and symbols.Fig 2.11 Input WindowUsers can change some values by using the mouse wheel, such as time. Move cursor onto the value, and roll thewheel when the value blinks click it.It supports mouse dragging, i.e. set motion detection area: click customized, hold left button and drag to set motiondetection area. Set schedule: hold left button and drag to set schedule timeIn playback: Click left button to choose the options. Click right button to return to search mode.In backup: Click left button to choose the options. Click right button to return to live view.In PTZ control: Click left button to choose the buttons to control the PTZ. Click right button to return to searchingmode.Note: Mouse is the default tool in all the operations below unless stated otherwise.