Q-See QSD42908C8 User Manual

Contents

QSD42908C8 User’s Manual60Alarm relay output setupStep 1: In “Alarms” menu, use【↑】【↓】keys to select one alarm output.Step 2: Select delay timeThe delay time is when the alarm ends, the alarm output will continue output time. The delaytime options are: 5 Seconds, 10 Seconds, 30 Seconds, 1 Minute, 2 Minutes, 5 Minutes, 10 Minutesand Manual Stop. If you select the “Manual’ option, the alarm output will not stop until you pressthe “Clear Alarm” button in the “Utilities” menu. The actual alarm output time is made up ofalarm input time and this delay time.Step 3: Enter into alarm out scheduleYou can set the schedule to make alarm output effective. Move the “Active Frame” to the“Schedule” button on right side of “Alarm Out Time”, press【ENTER】key to enter into thecorresponding schedule menu as shown in fig 5.25Fig 5.25 Alarm out scheduleStep 4: Setup alarm out scheduleLike other schedule setups, you can set 4 time periods for one day and 7 days for one week.When you finish setup, press the “Confirm” button to return to “Alarms” menu.Step 5: Copy one alarm output parameters to other alarm outputsIn “Alarms” menu, you can copy parameters of current alarm output to other alarm outputs.