Q-See QSD6204 User Manual
                                                | |
Contents
| 
(1) PASSWORD CHANGE·6-DIGITPASSWORD·DEFAULTPASSWORDSETTING:111111When you select “CHANGE PASSWORD”, the menu below willopen.1. Press the channel 1 button six times.2. Once you have input the current password, you can set a newpassword.3. Then confirm the password you have set.·You can use a combination of any of the buttons, except the [MENU]button on the front of your DVR to set a new password·When the new password is accepted the following screen message willflash: “Password changed”·The message will blink 3 times. Then the “MENU” will return. If thepassword is not accepted you will receive a message that informs youthat it was not accepted and the “MENU” returns. You may try againby repeating the same steps.NOTICE: The Factory Default Password is 111111.This number(1) Corresponds with the button for camera “one” on the front ofyour DVR.-23- |
Related manuals for Q-See QSD6204
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine