Q-See QSD9004V User Manual
                                               | |
Contents
| 
User Manual28Click Play button on the bottom left corner (red box in first picture below) to connect to DVR. Afterconnecting, CH1 will display as shown in the second picture below. You can change to CH2 by push # 2 (redbox in second picture below).If you have an 8 camera system you would click on the down arrow in the bottom row (red box in first picturebelow) to view the buttons to access the next 4 cameras (as shown in the red box in the second picture below).If you have a 16 camera system continue to click on the down arrow to access the rest of the cameras.If you like this application, please leave good feedback in appstore.5.2.6.5 Motion Detect Click [MainDeviceMotion] to enter into the [Motion Detection]menu to setup motion detection recording.The [Motion detection] Menu has three sections, includingChannel Status, Sensitivity and Motion area.Channel STATUS: This option allow you enable motion detectionon any channel.SENSITIVITY: This option allows you to set sensitivity level ofmotion detection from 1 to 4 with 4 being the most sensitive.Picture 5-38 |
Related manuals for Q-See QSD9004V
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine