Q-See QSDT8PCRC User Manual

Also see for QSDT8PCRC: User manual

Contents

Q-See QSDT8PCRC User Manual Manual pdf 91 page image

SuperDVR & H.264 Series CardsUser ManualAppendix1 Frequently AskedQuestions91Appendix 2.2.3 How to set recycling record mode on the systemSelect ‘Recycle’ in basic configuration, refer to Figure5-1.Users can select the percent of used disk space to set up “disk shortagealarm.” You can input percent manually or choose the selectable options suchas, 25%, 50%, and 75% to set up. For example, if selecting 50%, an alarm willwarn you when your disk space usage reaches 50%.TIPIt is recommended that you install SuperDVR onto the partition with your Windowssystem (normally C:), and save recorded files on a different partition: .Appendix 2.2.4 How to set auto reboot functionWhen a Microsoft Windows system runs continuously for a couple of days thesystem may become unstable; therefore, it is suggested you restart thecomputer every few of days.In the basic configuration (refer to Figure5-1), input Windows user name andpassword (It is not SuperDVR user name and password), and select timeinterval, then the Windows system will automatically restart according to theset time.If the Windows system shutdown unexpectedly, i.e. power supply is cut off,when computer reboots, SuperDVR system will automatically restart, andkeep the settings you have entered.TIPUsers do not need to enable auto reboot function, but it’s suggested to input theWindows user name and password in the relative area, therefore when the system shutsdown unexpectedly, users don’t need to input Windows and SuperDVR user names andpasswords.Appendix 2.2.5 How to quickly setup the schedule record functionPress ‘Shift’ or ‘Ctrl’ key, and draw the cursor in corresponding areas to makeschedules for multiple channels.Appendix 2.2.6 What are the byte rates for different image qualities fromhighest to normal?The frame rate is 30 fps, bit rate for the highest image quality is about1.2MByte/s, and for the lowest image quality is about 50KByte/s.Appendix 2.2.7 The frame rate seems to be lower than what I setThere is frame loss in image switch therefore the real recording frame rate isrelatively lower than the theoretic value.Appendix 2.2.8 Why can’t I select more channels to backup?Please draw the mouse in the channel selection area, or utilize Shift and Ctrlkey for assistance.