Q-See QSTD2404 User Manual

Also see for QSTD2404: User manual

Contents

Q-See QSTD2404 User Manual Manual pdf 14 page image

Digital Video Recorder User Manual102.5 Controlling with Mouse2.5.1 Connect MouseDVR supports PS/2 or USB mouse through the ports on the rear panel, pleaserefer to Fig 2.10 Remote Control.Notice: If mouse is not detected or does not work, try the following:1. Unplug/re-plug several times2. Power off/on several times3. Try another mouse2.5.2 Using a MouseThe structure of the main menu is shown in Fig 2.10 Remote ControlIn live Mode:Click left button on one camera to display full screen. Click again to return tothe previous screen display.Click right button to show the control bar at the bottom of the screen as Fig2.10 Remote Control. Here are all the control and setup options. Click rightmouse again to hide the control bar.In Setup Mode:Click left button to enter. Click right button to cancel setup, or return to theprevious screen.If you want to input a value, move cursor to the blank and click. An inputwindow will appear as Fig. 2.11. The menu supports number, letter and symbolinput.Fig 2.11 Digital Numbers and Letters Input WindowUsers can change some values by using the mouse wheel, such as time.Move cursor onto the value, and roll the wheel when the value changes.The menu supports mouse drag. i.e. Set motion detection area: clickcustomized, hold left button and drag to set motion detection area. Set schedule:hold left button and drag to set schedule timeIn playback:Click left button to choose the options. Click right button to return to searchingmode.In backup:Click left button to choose the options. Click right button to return to live.In PTZ control:Click left button to choose the buttons to control the PTZ. Click right button toreturn to searching mode.