Q-See QSTD5304 User Manual
                                                             | |
Contents
| 
QSTD5304 Digital Video Recorder User Manual20For example, if you select the sensor named SENSOR1 and the triggerrecords named CAM1 and CAM2, it will record on channel 1 and channel 2when the SENSOR1 is triggered.6. ALARM OUTThere are two options: ALARMOUT1 and BUZZER.• When ALARMOUT1 is selected and the sensor is triggered, DVR willgive send a signal to the alarm out port.• When BUZZER is selected and the sensor is triggered, DVR will givebuzzer alarm.• When the alarm output is unselected, DVR will not send alarm.7. SCHEDULEThis is the schedule of when the sensor detection is active. The defaultschedule is everyday.8. COPY TOUsers can copy the setting of this channel to all or any other selectedchannel.OTHER ALARMOther Alarm submenu is shown in Fig. 3.13. Other alarm includes video loss,disk full and so on.Fig 3.13 Other Alarm ConfigurationThere are two options of alarm output: ALARMOUT1 and BUZZER. Theirfunctions are same with that in sensor alarm.3.2.5 PTZ ConfigurationPTZ Configuration menu is shown in Fig. 3.14.Fig 3.14 PTZ Configuration |
Related manuals for Q-See QSTD5304
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine