Q-See QT17DVR4C User Manual

Also see for QT17DVR4C: User manual Quick installation guide

Q-See QT17DVR4C User Manual Manual pdf 31 page image

QSDR174RTC User Manual27(Picture 59)(Picture 60)(Picture 57)(Picture 58)5.2.7.6: Motion DetectClicking on the MOTION icon in the Device Management interface(Picture 32) will allow you to configure your Motion Detection settings.Once you click on the icon a pop up MOTION DETECTION Setupinterface as illustrated in Picture 57 will appear and you will be able toconfigure the various settings directly through here. The [Motiondetection] Menu has three sections, including Channel Status, Sensitivityand Motion area.Channel STATUS: This option allow you enable motion detection on any channel.SENSITIVITY: This option allows you to set sensitivity level of motion detection from 1 to 4 with 4 being the mostsensitive.MD AREA: This option allows you select the area you want to be sensitive tomotion. The area is separated into a 13*10 grid as depicted in Picture 58. Whenany object moves into the area you have designated to protect, recording will betriggered. You can choose which areas to protect by clicking on the individualsquares of the grid (as illustrated by the red blocks chosen in Picture 58). Motiontriggered recording will not occur in the area outside of the chosen grid (asillustrated by the semi-transparent blocks in Picture 58).5.2.8: System FunctionThe Main Menu interface (Picture 4) allows you to access the System Setupmenu by clicking on the System icon. The System Setup menu (Picture 59)gives you access to these sub-menus to configure their settings individually:Time Set, User Password, Audio/Video Setting, Language select, System Infoand System Maintenance.5.2.8.1: Time SetClick the [Main menuSystemDate/Time] in turn to Enter into the time setupmenu shown as Picture 60. In the Time Setup menu, you can modify yoursystem date and time; set the date/time and time zone format, and enabledaylight savings time.