Q-See QT454-403-5 User Manual

Also see for QT426: User manual User manual Quick installation guide Setup manual User manual

Q-See QT454-403-5 User Manual Manual pdf 15 page image

28 29CHAPTER 4 MAIN MENU SETUP4.1 BASIC CONFIGURATIONLOGINBefore configuring the system, a user account needs to be created and a user must belogged in. The DVR can be configured to allow multiple users, each with their own level ofaccess and authority. If not logged in, only the multi-screen display can be changed.MAIN MENU SETUP CHAPTER 4When starting for the first time, or when noone is logged into the device, pressing theMENU button on the DVR or remote controlor right-clicking on the screen with the mousewill bring up the LOGIN screen. The defaultuser name and password is admin and123456. Both are case-sensitive.For more on adding or deleting users, settingpasswords and setting access levels, pleasesee SECTION 4.8.PICTURE 4-3PICTURE 4-1PICTURE 4-2DISPLAY MODEYou can select whether to view a single channel at a time, or view mutlitple channels in a splitscreen mode. In addition, users have the option to select how many channels to view at onceas well as which channels will be shown in that multi-channel display.Click the icon beside the desired screen display mode to open the CHANNEL SELECTmenu.Users can check any or all channels between1 and 16 (depending on your model) todisplay the live feeds. Click the box toconfirm the settings before closing theCHANNEL SELECT menu by clicking on thebutton.MAIN MENUSelecting the MENU icon on the left of the CONTROL BAR or pressing the MENU button onthe DVR and remote control open the MAIN MENU.PICTURE 4-4PICTURE 4-6Clicking on any icon will open the relevantmenu.SETUPFrom the SETUP menu select the BASICmenu to set device name, date, time andother settings. There are three tabs coveringSystem, Date & Time and DaylightSavings Time (DST).System TabThe following settings can be changed in this menu:Device Name: This will display on the clientend or CMS. Naming the device willhelp users recognize the device whenmonitoring remotely.Device ID: If you have multiple systems, youcan give this device a numerical ID.Video Format: Select between NTSC (NorthAmerica) or PAL (Europe) videostandards.Password Check: By enabling this, auser will need to enter nameand password when performingconfiguration operations.Show Time: Displays time in Live ViewShow Wizard: If this is enabled, a windowto reset time and time zone will openupon system restart.Max Network Users: Set the maximumnumber of network connections - upto 10.PICTURE 4-5