Q-See QT454 Quick Start Manual

Also see for QT426: User manual User manual User manual Quick installation guide Setup manual

Contents

Q-See QT454 Quick Start Manual Manual pdf 3 page image

Control Bar Click on any icon to use that feature.Screen DisplayModeDwellVolume Snapshot PlaybackPTZ RecordColorZoomMoveControl BarMenuMenu: Opens the Main Menu.Screen Display Mode: Choose the number of screens you wish to viewsimultaneously. Channels without attached cameras will display “Video Loss.”Clicking on the upward pointing arrows to the right of each icon will allow youto select which channels to view in that mode.Dwell: Enable/disable the automatic cycling between channels.Color: Adjust brightness, hue, saturation and contrast for any channel.Zoom: Available in single screen display mode, this digitally enlarges a section ofthe display. Click and drag to move within the video image.Volume: Adjust volume. This is only applicable if you have attached amicrophone or audio-capable camera to the DVR.PTZ: Controls optional Pan-Tilt-Zoom cameras.Snapshot: Captures a still image from all channels.Record: Begin manual recording on all channels.Playback: Switches to Playback mode and brings up the Playback Control Bar.Move Control Bar: Reposition the Control Bar anywhere on the screen.The basic functions of the Control Bar are listed to the right. Each function is covered in more detail within the manual.Camera Set UpSTEP 7 Connecting the Cameras1. Connect the BNC and power leads on the camera to the matching connectors on the power andvideo cable.NOTE: The male power end fits into the matching power lead on the camera.2. Connect the BNC connector on the other end of the cable to any of the Video In ports on the back ofthe DVR.3. Plug one of the power leads on the power splitter into the power lead on the power and video cable.4. Repeat for each camera included with this package to ensure proper connection and function.5. Connect the single end of the power splitter to the power adapter.6. Plug the power adapter into a surge protector. You should now see a live video feed from each ofyour cameras.1 2 3 4 5 6REPEATYou may now mount yourcameras.To hide the control bar, right-click again.OperationSTEP 8 Playback and Search1. Return to the Main Menu as described inStep 6, above.2. Click on the Search icon.3. This DVR is default configured to record on motiondetection.To view these recordings:a. Select the EVENT SEARCH tab.4. Double click on the event you wish to review and it will begin replaying. The PlaybackControl Bar will appear below the video, allowing you to control the playback. Itoperates like a standard video player.PreviousRecordPlay/PauseStop FastForwardRewind Screen DisplayModeVolumeHideTool BarExitFrameAdvanceNextRecordPlaybackProgress BarZoom Colorb. Select the date youwish to search.c. Click the Searchbutton.You will be presentedwith a list of recordedevents.Imagea cbMeijer.com

/ 3

Related manuals for Q-See QT426