MAIN MENU GUIDE QT518 & QT5116 User Manual32 | P a g e4.2.2 Live ConfigurationFrom the Pop-Up Menu illustrated in Fig 4.3 System Setup, select Live and a user interface for all the Live settingswill appear as illustrated in Fig 4.5 Live Configuration.Fig 4.5: Live ConfigurationIn the Live Configuration dialog, users can set name/time display, picture color and hide cameras. The following arethe definitions of each option.Camera Name: Set camera name. It can be a combination of numbers, letters and symbols.Show Name: Display camera name in live view.Hide: Hide the picture in live. Unauthorized users cannot view the camera. But it still works in the backgroundrecording.Show Time: Display time in live view.Dwell Time: Is available for both Sequence and SPOT simultaneously. This unit has 2 channels of video output,refer to Fig 2.3 Rear Panel Instructions. One is the main output, the other is a spot output. Users can set thedisplay time of cameras in auto dwell and spot out.SPOT Enable: Enable spot video output.From the Live Configuration dialog illustrated in Fig 4.5, click the Set button and a window will appear as shown in Fig4.6 Color Adjustment. In this window, you can adjust the hue, saturation and contrast. Clicking on the Default buttonwill adjust your color settings to the factory default level.Fig 4.6: Color Adjustment