QEI 7RSP1 Installation & Operation Manual
                | |
Radio Synthesizer Panel UG-10104 Unpacking and Inspection Copyright © 2016 QEI2 Installation2.1 Unpacking and InspectionCautionBE CAREFUL, DURING UNPACKING, TO AVOID DAMAGE TO THE EQUIPMENT.2.1.1 Damage ClaimsThe 7RSP1 Radio Synthesizer Panel has been carefully packed to provide maximumprotection during handling and transportation. Immediately upon receipt,check theequipment for obvious signs of damage. Even if the equipment will not be installedimmediately, it is advisable to unpack it sufficiently to expose any hidden damage. Ifexternal or internal damage exists,make an immediate report to the shipping carrier andnotify QEI.2.1.2 Missing ItemsEach 7RSP1 Radio Synthesizer Panel includes a parts list at the end of the manual.Check all hardware against the parts list and immediately report any shortage to QEICompare instruction manuals and drawings to the Documentation List and/orpacking list and report any shortage to QEI.2.2 Test Equipment and ToolsTable 2-1 lists the test equipment and tools which are recommended for use when installingor maintaining the 7RSP1 Radio Synthesizer Panel.TABLE 2-1. TEST EQUIPMENT AND TOOLSEQUIPMENT PURPOSEOscilloscope, Dual Trace To check and adjust signal durationsAnd timing in high- speed data processingcircuts.AC Voltmeter To measure audio frequency voltages.Digital Multi-meter To measure power supply levels andmake other dc, low-frequency, andresistance checks.Electronic Toolbox(Standard) To maintain system |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine