QEI ePAQ-942 Series User Manual
Also see for ePAQ-9410: User manual
                                          | |
Contents
| 
ePAQ-9410 / ePAQ-9420 User’s Guide UG-1071Copyright © 2017 QEI LED Indicators 7S1 PWRL2PWRHBTL3L1L4OPTIONS1 2 3 4FRONT PANEL LABELS1 Dip switch bank of 4 switches.Switches are application specific (see the appropriateConfigWiz2 addendum for further information).DIP switch 1: Safe Mode. Requires a power cycle to enable. Up (off) - Normal mode. IP address is that configuredin the NetConfig component in the ConfigWiz2software Down (on) - Safe mode. IP address is set at192.168.1.199. Note: Be aware of other RTUs thatmay be in safe mode on the same network as theywill share the same IP address.5 LED Indicators5.1 DiagnosticsS1 PWRL2PWRHBTL3L1L4OPTIONS1 2 3 4LED Name FunctionHBT Heartbeat – This LED will flash on and off at a 1 Hz rate to indicatethat the microprocessor circuitry is functional. The LED may flash at |
Related manuals for QEI ePAQ-9410
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine