27● The unit contains different setting menus. Once the initial programming is entered, it willbe remained in the memory until change, and the unit can always be operated under thesame conditions.● The settings will be remained in the memory until the settings are changed, even aftersetting the player to standby mode.Common procedure for initial settings- Press MENU button on unit top or remote control to display the main menu.- Press LEFT or RIGHT navigation button to select wanted item.- Press ENTER or RIGHT navigation button to enter submenu page.- Press UP or DOWN navigation button to select the option that want to adjust.- Press LEFT or RIGHT navigation button to adjust selected option to desired value. Thenpress ENTER button to confirm the selection.- Press MENU button to return to previous menu page.- Press EXIT button to exit menu page.TV MODE- Press SOURCE button on unit top or remote control to set the unit in TV mode. Then thescreen will display below menu page, if first time using:● Menu Language- Press UP or DOWN navigation button to select Menu Language item.- Press LEFT or RIGHT navigation button to select wanted language.● Signal Type- Press UP or DOWN navigation button to select Signal Type item.- Press LEFT or RIGHT navigation button to select wanted Signal Type.● Auto Channel Search- Press UP or DOWN navigation button to select Auto Channel Search item.- Press ENTER button to start channel searching.MAIN MENU