QMOD QMOD-HDMI 2 Product Manual
               | |
Contemporary Research 12 QMOD-HDMI1.5Rack MountingThree options are available for rack-mounting QMOD modulatorsRK2EZ Dual Rack Kit with Tie Bar MountingQMOD enclosures have a slot in the bottom middle of the case. This will accept a tie bar that will lock the twoenclosures together without taking the cases apart. Do not mount the QCA9-33 or QDA4-45 units next toQMODs, as the units will block flow-through fan ventilation.1. Check that your enclosures have the tie bar slot.2. Slide the included tie bar into the side of one unit and attach with the included screws.3. Slide the other unit into the tie bar, and attach the screws4. Add the rack mounts to the sides.RK1 Single Unit Rack MountAttach the long and short rack ears to the side and towards the front of the unit with the four (4) supplied 8-32 by ¼” (black) countersunk screws.RK2 style – Locking Cases together1. Remove top cover of the first unit by removing the ten (10) black screws.2. Attach cover of first unit to the side of the second with three (3) supplied 4-40 by 1/4" (silvercolored) panhead screws and split lock washers. Note that only one side of the second unit has the(3) built in nuts to accept the screws above.3. Reinstall the bottom/chassis of the first unit underneath its cover and attach with just eight (8) ofthe screws removed in step 1.4. Attach short rack ears to the side and towards the front of each unit with the four (4) supplied 8-32by 1/4" (black) countersunk screws. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine