QMS Print System QMS 3260 Getting Started Manual
Also see for 3260: Quick setup guideOperation
                                                                                      | |
Contents
| 
+#'' !" 2 / '& ' 2 $ 1 In Adobe Illustrator, enable 600 dpi by choosing Document Setup from theFile menu.» Note:Adobe Illustrator 5.5 has a default setting of 300 dpi.2 Click on Use Printer’s Default Screens to enable it.3 Go to Output Resolution and enter the resolution.! , For best output quality and accurate screening, install the QMS-developed Windowsdriver as described in chapter 3, “Installing a PostScript Printer Driver.” Then do thefollowing:1 From Page Setup dialog box of the Photoshop application, select Screens.2 Then click the Use Printer’s Default Screen box to enable it.In addition, RGB graphics created in Photoshop 2.5 and later include data calledRGB tags, which causes Photoshop to use its own algorithms when convertingRGB data to CMYK for separations. Unless these tags are disabled (possible in allversions except 3.01), Photoshop converts all RGB data to CMYK rather than let-ting the printer perform the conversion. Use the following procedure to disableRGB tags in Photoshop for Windows. (RGB tags are disabled by default in Photo-shop for Macintosh.)3 Make a backup copy of the Photoshp.ini (Photoshop 2.5x) or Photos30.ini(Photoshop 3.0 and later) initialization file.4 Using a text editor, open the original initialization file.5 In the [Photoshop} section of the initialization file, add the following line:Disablergbtags=16 Save the initialization file (in text-only format).7 Restart Photoshop.&We recommend that you install a Windows Printer Description (WPD) file instead ofthe QMS Level 2 Windows driver with PageMaker 5.0 because PageMaker requires a |
Related manuals for QMS 3260
manualsdatabase
Your AI-powered manual search engine