QOLSYS IQ GLASS-S Installation Manual

Contents

specifications

QOLSYS IQ GLASS-S Installation Manual Manual pdf 1 page image

Sensor: 2.75”H x 3.88”W x 1.5”DCompatible control panels: Qolsys IQ Panel 2Frequency: 319.5MHzBattery: 3V GP CR123A (x2)Operating Temperature: 14°F to 122°FDetection Range: 20ft Max and 5ft MinIntended for use with IQ Panel 2Supervisory signal interval: 70 min (approximately)Intended for use with 3/16” and 1/4” plate or temperedglass.SPECIFICATIONSIQ GLASS S-LINE INSTALLATION MANUALCeilingWalls✓✓Mounting Height:The sensor should be mounted between 6.5ft and 8.5ft above the floor.All protected glass must be within a clear line of sight of the sensor andwithin the 20ft max range.Ceiling mountWall mountCHOOSEINSTALLATIONLOCATIONSTEP1IQ GLASS-SNote: for UL/cUL listed the deviceshall be secured using the providedmounting screws.STEP2 STEP3 DETACHFACEPLATESTEP4 STEP5 REPLACEFACEPLATESECURETOSURFACEREMOVEBATTERYTABPlace your panel in“autolearn" modeOpen and close the caseto “tamper” the deviceCustomize name and settings asdesired and touch “ADD”ADDSTEP6 LEARNINTOPANELNote: Detector LED will flash rapidly for 5minutes as part of initial power upsequence.Note: For UL/CUL installations use this device only in conjunctionwith compatible Qolsys wireless alarm system IQ Panel 2.

/ 2

Related manuals for QOLSYS IQ GLASS-S