QRS Music Technologies 2000C Owner's Manual
                            | |
Contents
| 
81234567891011Pressing this button will power the entire system “ON” or “OFF”.Use the “MUTE” button to silence both the piano and the orchestration.Pressing the “PIANO VOLUME UP” button will increase the volume of the piano.Pressing the “PIANO VOLUME DOWN” button will decrease the volume of the piano.TIP: Pressing both buttons simultaneously will return the piano to the default level.The “MASTER VOLUME UP” button increases the volume of the piano and orchestration.The “MASTER VOLUME DOWN” button decreases the volume of the piano and orchestration.TIP: Pressing both simultaneously will return all levels to their default volume.Use the “AUDIO VOLUME UP” button to increase the volume of the orchestration.Use the “AUDIO VOLUME DOWN” button to decrease the volume of the orchestration.TIP: Pressing both of these buttons simultaneously will return the orchestration to its default value.Press the “TREBLE” button and use the “AUDIO VOLUME UP or DOWN” button to boost or cut the high endfrequencies of orchestration.Press the “BASS” button and the “AUDIO VOLUME UP or DOWN” button to boost or cut the low frequencies of theorchestration.TIP: Press the “TREBLE and BASS” buttons simultaneously to return to their default value.This red LED indicates power ON, and when entering “TREBLE or BASS” mode will turn off, indicating that youhave entered the BASS or TREBLE adjust mode.This is the “Infrared Sensor” that picks up your remote control commands. To avoid problems with the remote control function,do not block this window.Special function: “Piano Sync” (piano to orchestration synchronization) can be varied (+/-) 50 milliseconds to compensate forlarge separations in piano and speaker placement. This adjustment is not recommended for normal system configurationsbecause misadjustment of sync will cause deterioration of the overall sound quality.To enter sync mode, press the “PIANO DOWN” and the “MASTER UP” buttons simultaneously. The red power LED will turnoff indicating you have entered sync mode.While in the sync mode, use the “PIANO UP” and “PIANO DOWN” buttons to make adjustments.TIP: While in sync mode, pressing the “PIANO UP” and “PIANO DOWN” buttons simultaneously will set the sync back to thedefault settings.2000C Front Panel Description2000C Front Panel Description2000C Front Panel DescriptionQRS Pianomation 2000CMUTEPowerIR SensorON/OFFPianoVolumeMasterVolumeAudioVolumeBASSTREBLETIP: When adjusting parameters, briefly tap the buttons to make changes one increment at a time. Pressing andholding a button will step through its entire range rapidly.11 1 2 3 4 5 6 7 8 9 |
Related manuals for QRS Music Technologies 2000C
manualsdatabase
Your AI-powered manual search engine