QSC Q-SYS Core 3000 User Manual

Also see for Q-SYS Core 1000: User manual

Contents

lithium battery warning

QSC Q-SYS Core 3000 User Manual Manual pdf 2 page image

1 2IMPORTANT SAFETY PRECAUTIONS AND EXPLANATION OF SYMBOLSThe lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated“dangerous” voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to humans.The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and mainte-nance (servicing) instructions in this manual.SafeguardsElectrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. Improper usecan result in potential electrical shock or fire hazards. In order not to defeat the safeguards, observe the following instructions for its installation, useand servicing.CAUTION: To reduce the risk of electric shock, do not remove the cover. No user-serviceable parts inside. Refer servicing to qualifiedservice personnel.WARNING: To prevent fire or electric shock, do not expose this equipment to rain or moisture.Maximum operating ambient temperature is 50°C (122°F).1.Never restrict airflow through the device fan or vents. Please insure that the air intake and exhaust vents are unobstructed.2.When installing equipment into rack, distribute the units evenly. Otherwise, hazardous conditions could be created by an uneven weight distribution.3.Connect the unit only to a properly rated supply circuit. The Q-Sys™ Core 1000, Core 3000, Core 4000 and I/O Frame are suitable for connection to4.100 – 240 VAC. The Q-Sys Core 1000, Core 3000, Core 4000 and I/O Frame are suitable for 50 – 60 Hz, with no special considerations other thanthe appropriate IEC power cord.Reliable Earthing (Grounding) of rack-mounted equipment should be maintained.5.Lithium Battery WarningTHE Q-SYS CORE 1000, CORE 3000 AND CORE 4000 EQUIPMENT CONTAIN A NON-RECHARGEABLE LITHIUM BATTERY. LITHIUM IS A CHEMI-CAL KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER OR BIRTH DEFECTS. THE NON-RECHARGEABLE LITHIUM BATTERY CON-TAINED IN THIS EQUIPMENT MAY EXPLODE IF IT IS EXPOSED TO FIRE OR EXTREME HEAT. DO NOT SHORT CIRCUIT THE BATTERY. DO NOTATTEMPT TO RECHARGE THE NON-RECHARGEABLE LITHIUM BATTERY.Warranty (USA only; other countries, see your dealer or distributor)DisclaimerQSC Audio Products, LLC (“QSC”) is not liable for any damage to amplifiers, loudspeakers, or any other equipment that is caused by negligence orimproper installation and/or use of this signal processing product. While QSC has endeavored to develop and produce the most dependable androbust network audio product for your use, due to the myriad of network situations and equipment that may be encountered in its implementation,QSC cannot be held responsible for network conflicts and associated consequences that may result. For this reason, QSC strongly recommends thatthe network used for implementation of Q-Sys products be completely separate from all other networks, data or otherwise. As such, should you electto integrate Q-Sys products with your existing network system, all risks attendant to such integration of Q-Sys products with your existing network ornetwork systems are assumed by you. While QSC strives to provide the highest quality technical solutions for networked audio products, in no eventwill QSC or its suppliers be held liable for any damages, consequential, incidental or otherwise, including any claims for lost profits and/or savingsresulting from any attempted integration of Q-Sys products with your networking systems. No agent, employee or representative of QSC has anyauthority to alter or modify in any manner, the disclosures and recommendations set forth herein.QSC Audio Products 3-Year Limited WarrantyQSC Audio Products, LLC guarantees its products to be free from defective material and/or workmanship for a period of three (3) years from the dateof sale and will replace defective parts and repair malfunctioning products under this warranty when the defect occurs under normal installation anduse – provided the unit is returned to our factory or one of our authorized service stations via prepaid transportation with a copy of proof of purchase(i.e., sales receipt). This warranty provides that the examination of the returned product must indicate, in our judgement, a manufacturing defect.This warranty does not extend to any product which has been subjected to misuse, neglect, accident, improper installation, or where the date codehas been removed or defaced. QSC shall not be liable for incidental and/or consequential damages. This warranty gives you specific legal rights. Thislimited warranty is freely transferable during the term of the warranty period.Q-Sys™ I/O Frames and Cores contain removable I/O cards. Changing these cards should be attempted only by those who are skilled andexperienced with the internal mechanics of digital electronic devices. Proper tools and procedures must be used. Failure to carefully follow theinstructions detailed in the Q-Sys User Manual may result in mechanical or electrical damage. Failures that are, in the judgment of QSC causedby improper removal or installation of I/O cards are not covered under the QSC Limited Warranty.Customer may have additional rights, which vary from state to state.In the event that this product was manufactured for export and sale outside of the United States or its territories, then this limited warranty shall notapply. Removal of the serial number on this product, or purchase of this product from an unauthorized dealer will void this limited warranty. Periodi-cally, this warranty is updated. To obtain the most recent version of QSC’s warranty statement, please visit www.qscaudio.com.Contact us at 800-854-4079 or visit our website at www.qscaudio.com.FCC StatementNOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, usesand can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures:Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.•© 2009, QSC Audio Products, LLC.USA and foreign patents pending.QSC is a registered trademark of QSC Audio Products, LLC.“QSC” and the QSC logo are registered with the U.S. Patent and Trademark Office.All trademarks are the property of their respective owners.RoHS StatementThe following chart is provided for product use in China.Q-Sys™ Core 系列, Q-Sys I/O Frame部件名称(Part Name)有毒有害物质或元素(Toxic or hazardous Substances and Elements )铅(Pb)汞(Hg)镉(Cd)六价铬(Cr(vi))多溴联苯(PBB)多溴二苯醚(PBDE)电路板组件(PCB Assemblies) X O O O O O机壳装配件(Chassis Assemblies) O O X O O OO: 表明这些有毒或有害物质在部件使用的同类材料中的含量是在 SJ/T11363_2006极限的要求之下。O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363-2006.X: 表明这些有毒或有害物质在部件使用的同类材料中至少有一种而含量是在SJ/T11363_2006极限的要求之上。X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limitrequirement in SJ/T11363-2006.