iRegional EMC Compliance InformationFCC Verification Notice (USA only)This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.Class AThis equipment has been tested and found to comply with the limits for a Class A digital device pursuantto Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference when the equipment is operated in a commercial environment.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used inaccordance with the manufacturer’s instruction manual, may cause harmful interference with radiocommunications. Operation of this equipment in a residential area is likely to cause harmful interference, in whichcase you will be required to correct the interference at your own expense.INDUSTRY CANADA (Canada only)This Class B (or Class A, if so indicated on the registration label) digital apparatus meets the requirements of theCanadian Interference-Causing Equipment Regulations.Cet appareil numérique de la Classe B (ou Classe A, si ainsi indiqué sur l’étiquette d’enregistration) respectetoutes les exigences du Reglement sur le Materiel Brouilleur du Canada.CE Declaration of Conformity (EUROPE only)This product has been tested in accordance to, and complies with the European Low Voltage Directive(73/23/EEC) and European EMC Directive (89/336/EEC).The product has been marked with the CE Mark to illustrate its compliance.VCCI (Japan only)English translation of the notice above is as follow:This is a Class A product based on the standard of the Voluntary Control Council for Interference (VCCI) forinformation technology equipment. If this equipment is used in a domestic environment, radio disturbance mayarise. When such trouble occurs, the user may be required to take corrective actions.