QTech QSW-6200-32T Hardware Installation And Reference Manual

Contents

QTech QSW-6200-32T Hardware Installation And Reference Manual Manual pdf 31 page image

QSW-6200 Series Switch Hardware Installation and Reference Guide 31www.qtech.rudevice signal interfaces caused by over-voltage or over-current of lightning.3.3.1 Mounting the Switch in a Standard 19-inch RackThe QSW-6200 series switches follow the EIA standard dimensions and can be installed in 19-inch rack. During theinstallation, place the front panel of the switch to the rack. For safety purposes, screw up the distributed screws as shownin the 3-1.Figure 3-1 Attaching the Mounting Bracket to the Switch3.3.2 Mounting the Switch on the WallThe QSW-6200 series switches can be mounted on a wall with the supplied mounting brackets, as shown in Figure 3-2.Figure 3-2 Attaching the Mounting Brackets to the Switch for Wall-Mounting3.3.3 Mounting the Switch on a TableFor often, users may not have a 19-inch rack. Thus, it is common to mount the switch on the workbench with 2 simplesteps: