QTech QSW-8200 series User Manual

Contents

QTech QSW-8200 series User Manual Manual pdf 25 page image

User ManualChapter 2. Hardware Installation 25www.qtech.ruPlease mount QSW-8200 series on the 19’’ rack as below:1. Attach the 2 brackets on the QSW-8200 series with screws provided in the accessorykit.2. Put the bracket-mounted switch smoothly into a standard 19’’ rack. Fasten the QSW-8200 series to the rack with the screws provided. Leave enough space around the switch forgood air circulation.Caution!The brackets are used to fix the switch on the rack. They can’t serve as a bearing. Please placea rack shelf under the switch. Do not place anything on top of the switch. Do not block theblowholes on the switch to ensure the proper operation of the switch.2.3.2 Connecting ConsoleQSW-8200 series provides a Mini-USB serial console port.Fig 2-2 Connecting Console to QSW-8200The connection procedure is listed below:1. Find the console cable provided in the accessory kit. Attach the Mini-USB end to consoleport of the switch.2. Connect the other side of the console cable to a character terminal (PC).3. Power on the switch and the character terminal. Configure the switch through thecharacter terminal.