Qlogic 12000 User Manual

Also see for QLogic 12000 Series: Installation guide Site planning guide Quick start guide Reference guide User guide

Contents

Qlogic 12000 User Manual Manual pdf 41 page image

Operations and AdministrationConfiguration and Monitoring FeaturesD000101-000 1-35ANOTE: If the checkbox is not checked the Gen Trap button will not generate atrap.Following are definitions for each configuration file trap:CfgSrvBackupFailedThe server was instructed to backup a file for a particular slot, which failed.CfgSrvSyncErrorSynchronization to the slave Management Module failed. The problem shouldbe resolved and attempted manually.CfgSrvGenErrorA general error has occurred.CfgSrvFileRestoredThe configuration files have been restored to a particular slot.CfgSrvFileBackedupThe configuration files have been successfully backed up for a particular slot.CfgSrvModeDisabledAn event has occurred that has caused the slot mode to be set to disabled. Theuser should resolve the error and reset the mode to the proper value for theaffected slot.NOTE: The default settings for this screen are as shown above. The user shouldnot change the defaults unless instructed by Technical Support.Subnet Manager Configuration FileThe Subnet Manager Configuration File screen allows the user to upload anddownload new QLogic Fabric Manager embedded subnet manager files, as well asstart and restart all applicable master and standby subnet managers using the newfile.Figure 1-58 Subnet Manager Configuration File