5–Fibre Channel Noninteractive Commands-cna (FCoE Utilities Menu for QLx81xx Adapters)5-8 SN0054667-00 BTo view general information for the adapter, issue the following command:qaucli -pr fc -cna <hba instance>|<hba wwpn> --geninfoTo view data center bridging exchange protocol settings, issue the followingcommand:qaucli -pr fc -cna <hba instance>|<hba wwpn> --dcb --infoTo update the message passing interface (MPI) configuration table on the adapterfrom a file, issue the following command:qaucli -pr fc -cna instance>|<hba wwpn> --updatecfg <mpifile>To save the current MPI configuration table of the selected adapter to a file, issuethe following command:qaucli -pr fc -cna <hba instance>|<hba wwpn> --savecfg <mpi file>To view DCBX Type-Length-Value (TLV) data sent and received over the adapterport connection, issue the following command:qaucli -pr fc -cna <hba instance>|<hba wwpn> --tlv --detail | --rawTo view data center Ethernet (DCE™) network activity information sent andreceived over the adapter port connection, issue the following command:qaucli -pr fc -cna <hba instance>|<hba wwpn> --mon --dce [ { <paramname> | <param alias> <param value> } ]Table 5-3 lists the DCE statistics parameters, possible values, and a description ofeach.Table 5-3. DCE Statistics ParametersParameterNameParameterAliasParameterValue DescriptionAutoPoll AP 01–256Set to auto polling modeSet to manual polling mode (iteration)SetRate SR 5–30 Set the polling interval rate (seconds)Details DT 0–2 Set the detailed display mode: 0 = Absolute 1 = Rate per second 2 = Baseline
