Qlogic 8200 Series User Manual

Also see for 3200 Series: User guide User guide User guide

Contents

Qlogic 8200 Series User Manual Manual pdf 87 page image

2–Configuring NICNIC Partition (NPAR)SN0054671-00 A 2-41The selected function now reflects the change made in Step 2. For example,the change made in Figure 2-21 is reflected in Figure 2-22 (function 2changed from Disabled to NIC.Figure 2-22. Port One Configured with NPAR EnabledNPAR Personality Changes Changing a function's personality requires the ESX Host to be rebooted forthe change to take effect. Each personality configuration change must be saved using the SaveConfiguration button.This means that to change two functions' personalities, each change mustbe separately saved using the Save Configuration button. Multiple personality changes may be made before rebooting the ESX serverafter saving the individual changes. The Function Type options for the FCoE and iSCSI capable functions do notreflect the total range of personalities that these ports may transition into. To transition from FCoE or iSCSI to NIC, the FCoE or iSCSI port must befirst disabled, rebooted, configured as NIC, and then rebooted again.