|
9–Fibre Channel Interactive CommandsHBA Parameters9-10 SN0054667-00 CConfigure HBA Parameters (-n)1. HBA Parameters2. Configure HBA ParametersFrom the HBA Parameters Menu, select the Configure HBA Parameters optionto open the Configure Parameters Menu with options to configure connectionoptions, data rate, frame size, hard loop ID, loop reset delay, BIOS, Fibre Channeltape support, operation mode, interrupt delay timer, execution throttle, login retrycount, port down retry count, LIP full login, link down timeout, target reset, LUNSper target, and receive out of order frame. For detailed information about theseparameters, see Table 5-9. For example:Configure Parameters Menu=======================================================HBA : 0 Port: 1SN : GFC0718P57753HBA Model : QLE2462HBA Desc. : QLE2462 PCI Express to 4Gb FC Dual ChannelFW Version : 4.00.26WWPN : 21-00-00-1B-32-17-F9-C4WWNN : 20-00-00-1B-32-17-F9-C4Link : Online=======================================================1: Connection Options2: Data Rate3: Frame Size4: Hard Loop ID5: Loop Reset Delay (seconds)6: Enable BIOS7: Enable HBA Hard Loop ID8: Enable Fibre Channel Tape Support9: Operation Mode10: Interrupt Delay Timer (100ms)11: Execution Throttle12: Login Retry Count13: Port Down Retry Count14: Enable LIP Full Login15: Link Down Timeout (seconds)16: Enable Target Reset17: LUNs per Target18: Enable Receive Out Of Order Frame19: Commit Changes20: Abort Changes
|
