Qlogic QME7342 Quick Start Manual

Contents

4❑ Packaged as a Clustercorp Rocks ® +Roll❑ Packaged as a Platform Open Cluster Stack (OCS) kitFor more information, see the detailed descriptions on the QLogic Downloads page.In addition to these packages, the InfiniBand Fabric Suite Software for managing, installing, upgrading, configuringand verifying InfiniBand clusters is available separately for purchase. Check with your local QLogic SalesRepresentative for details.To install the QLogic host software, please refer to the instructions in the QLogic HCA and QLogic OFED SoftwareInstall Guide. The link to this document can be found on the same page as the software driver downloads.Congratulations! You have successfully installed your QLogic Adapter!❑ To obtain the most current drivers, management tools, user instructions, and documentation, please visitthe QLogic Web site at http://support.qlogic.com/support/drivers_software.aspx and download the latestversions.❑ The following section contains additional information about the QLogic adapter, including the LEDscheme, troubleshooting, warranty, and certification information.Adapter LEDsQLogic InfiniBand Adapter LED SchemeLED States IndicationGreen OFFAmber OFFThe switch is not powered up. The software is neither installed nor started. Loss ofsignal.Verify that the software is installed and configured with ipath_control -i. Ifthe software is working properly, check both cable connectors.Green ONAmber OFFSignal detected and the physical link is up. Ready to talk to the subnet manager(SM) to bring the link fully up.If this state persists, the SM may be missing or the link may not be configured.Use ipath_control -i to verify the software state. If all adapters are in thisstate, then the SM is not running. Check the SM configuration, or install and runopensmd.Green ONAmber ONThe link is configured, properly connected, and ready. Signal detected. Ready totalk to an SM to bring the link fully up.The link is configured, properly connected and ready to receive data and linkpackets.Green BLINKING(quickly)Amber ONIndicates trafficGreen BLINKING aAmber BLINKINGaThis feature is available only on the QLE7240 and QLE7280 adapters.Locates the adapterThis feature is controlled by ipath_control -b [On | Off]Table Notes