2 – QLA2340/2340LFast!UTILFC2354601-00 A 2-5If you have a selectable boot BIOS and want to boot to an FC hard disk, set themotherboard BIOS parameters to None or Not Installed. The ROM BIOS on theQLA2340/2340L HBA automatically configures the FC peripherals.Some new system BIOSs support selectable boot, which supersedes theQLA2340/2340L HBA BIOS selectable boot setting. Select the QLA2340/2340LHBA FC hard disk in the system BIOS to boot from an FC hard disk attached to theQLA2340/2340L HBA.2.3Fast!UTILNOTE: The Fast!UTIL BIOS utility does not run on SunSPARC systems. Refer tosection 2.4 for information regarding adapter configuration settings and forinstalling FCode on a QLA2340/2340L HBA in a SunSPARC system.2.3.1IntroductionThis appendix provides detailed configuration information for advanced users whowant to customize the configuration of the QLA2340/2340L HBA and the connecteddevices.The QLA2340/2340L HBA can be configured using Fast!UTIL, QLogic’sBIOS-resident configuration tool. Access Fast!UTIL by pressing CNTRL+Q duringthe QLA2340/2340L HBA BIOS initialization (it may take a few seconds for theFast!UTIL Options menu to display). If you have more than one QLA2340/2340LHBA, Fast!UTIL asks you to select the QLA2340/2340L HBA you want to configure.After changing the settings and exiting the utility, Fast!UTIL restarts your system toload the new parameters.CAUTION! If the configuration settings are incorrect, your QLA2340/2340L HBAmay not function properly.The following sections describe the Fast!UTIL options.2.3.2Configuration SettingsThe first selection on the Fast!UTIL Options menu is Configuration Settings.These settings configure the FC devices and the QLA2340/2340L HBA to whichthey are attached.
