Qtx PAL8 User Manual

Also see for PAL10: User manual

Contents

Qtx PAL8 User Manual Manual pdf 3 page image

PAL SERIES User ManualRear PanelPowering upYour new PAL SERIES portable home PA unit may arrive with the internal battery charged.Before connecting to the mains, turn down all volume controls and switch the unit on (24) andthe power LED should light (9). The battery charge status is shown on 4 LED indicators (8).If there is little or no charge, you will need to charge the battery before using away frommains power.Connect the PAL SERIES unit to the mains using the UK/EU 13.5Vdc adaptor supplied (26),which is supplied with UK and EU pin connectors. Slide the correct type in place until it latches.When not in use but connected to the mains, if the POWER switch (24) is in the OFF position,the internal battery will be re-charged from the mains supply, indicated by a CHARGING LED(10) which lights when charging.You may otherwise opt to connect the DC input at the rear (12) to an external 12Vdc supply(e.g car battery) or use the internal battery if charged.1 Media player display2 USB port3 SD/MMC card slot4 Media player mode5 Media player repeat play setting6 VHF microphone volume7 VHF microphone antenna8 Battery status LEDs9 Power LED10 Charging LED11 Front LED lights power on/off12 12Vdc power input terminals13 Media player USB/SD source select14 Previous track (hold for seek)15 Next track (hold for seek)16 Play/Pause17 3.5mm AUX input18 Master volume19 Treble boost/cut20 Bass boost/cut21 Wired mic/guitar volume22 Echo effect level23 6.3mm jack mic/guitar select24 Power on/off25 Wired mic/guitar input 6.3mm jack26 13.5Vdc power input