Quadra-Fire 4300 Series Owner's Manual
Also see for 4300 Series: Installation, operation and maintenance instructionsInstallation, operation & maintenance instructionsOwner's manualInstallation manualOwner's manual
                                                | |
Contents
| 
August 31, 2010 7037-135G Page 194300 Wood Stove Series (ACC)RD. Chimney Termination RequirementsFollow manufacturers instructions for clearance, securing,flashing and terminating the chimney.• Must have an approved and listed cap• Must not be located where it will become plugged bysnow or other material• Must terminate at least 3 feet (91cm) above the roofand at least 2 feet (61cm) above any portion of theroof within 10 feet (305cm)• Must be located away from trees or other struc-turesThese are safety requirements and are not meant to assure proper flue draft.Figure 19.1E. 2-10-3 RuleFigure 19.2NOTE:• Chimney performance may vary.• Trees, buildings, roof lines and wind conditions affectperformance.• Chimney height may need adjustment if smoking oroverdraft occurs.3 ft. (91cm)MinimumLess than 10 ft. (305cm)2 ft. (61cm) 3 ft. (91cm)Minimum10 ft. (305cm) To Nearest Roofline2 ft. (61cm)Pitched Roof10 ft. (305cm) or more3 ft. (91cm) MinimumLess than 10 ft. (305cm)2 ft. (61cm)Minimum3 ft. (91cm) MinimumWall or ParapetFlat Roof |
Related manuals for Quadra-Fire 4300 Series
Quadra-Fire Mt. Vernon Series Owner's Manual
Quadra-Fire CASTILE-B series Owner's Manual
Quadra-Fire EXPLORER II Series Owner's Manual
Quadra-Fire PS35-C Owner's Manual
Quadra-Fire SAPPHIRE-MBK Owner's Manual
Quadra-Fire HUDBAY-FS Owner's Manual
Quadra-Fire MT VERNON Owner's Manual
Quadra-Fire MTVI-E2-MBK Owner's Manual
Quadra-Fire COLBAY-FS-B Owner's Manual
Quadra-Fire QFI30FB-IFT Owner's Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine