Quadra-Fire MTV-E2-CSB Installation Manual

Also see for MT. VERNON E2: Installation manual Owner's manual Owner's manual Manual

Contents

Quadra-Fire MTV-E2-CSB Installation Manual Manual pdf 5 page image

March 14, 2014 7080-131B 5MT VERNON E2• Installation and use of any damagedappliance.• Modification of the appliance.• Installation other than as instructed by Hearth & HomeTechnologies.• Installation and/or use of any component part notapproved by Hearth & Home Technologies.• Operating appliance without fully assembling allcomponents.• Operating appliance without legs attached (if suppliedwith unit).• Do NOT OverfireOr any such action that may cause a fire hazard.WARNINGHearth & Home Technologies disclaims anyresponsibility for, and the warranty will bevoided by, the following actions:Reciprocating Saw Channel LocksHammer Phillips ScrewdriverTape Measure Plumb Line1/4” Self-Tapping Screws Framing MaterialHi-temp Caulking Material GlovesSafety Glasses Framing SquareElectric Drill & Bits (1/4”) LevelMay also need:Vent Support Straps Venting PaintTools and building supplies normally requiredfor installation, unless installing into an existingmasonry fireplace:C. Tools And Supplies NeededB. Remote Thermostat LocationThe remote thermostat’s location will have some affect on theappliance’s operation.• When located close to the appliance, it may require aslightly higher temperature setting to keep the rest of thehouse comfortable.• When located in an adjacent room or on a different floorlevel, you will notice higher temperatures near the appli-ance.CAUTION! The remote thermostat is an integral part of theappliance. No other wall control or thermostat can besubstituted.D. Inspect Appliance and Components• Open the appliance and remove all the parts and articlespacked inside the Component Pack. Inspect all the partsand glass for shipping damage.• Report to your dealer any parts damaged in shipment.• All labels have been removed from the glass door.• Plated surfaces have been wiped clean with a soft cloth,if applicable.• Read all the instructions before starting the installation.Follow these instructions carefully during theinstallation to ensure maximum safety and benefit.• Follow pipe manufacturer instructions for installationand air clearance requirements.**HHT recommends a range limit of 20 feet for best perfor-manceMODE/SETRisk of Fire!Damaged parts could impair safe operation.Do NOT install damaged, incomplete orsubstitute components.WARNING