M Mode: Manual Flash1. M mode settingLong press the Button for 2 seconds and entersetting interface. Press the Button in theMODE option and the cursor is blinking. Turn theSelect Dial to choose M mode and press the Button to confirm. Long press the Button againto back to the main interface.2. Manual Setting Flash Power OutputThis flash can adjust the power output from 1/16 to1/1 in 1/3rd stops. “0.3”means 1/3 step, “0.7”means2/3 step. Press the Button on the first page ofthe main interface and the cursor is blinking. Turn theSelect Dial to set the amount. Press the Button again to confirm. To obtain a correct flashexposure, use a hand-held flash meter to determinethe required flash output.SETSETMODE MM 1/16A- 10 -
