WebCCTV Installation Manual 38Checking Physical Connection Screen2.5.3 Remote client testFor remote client testing, follow the steps below:1. Open a Microsoft Internet Explorer window.2. Fill in the IP address (e.g.: http://192.168.100.1) or domain name (e.g.:http://webcctv.mycompany.com) in the address bar.3. When accessing the WebCCTV from a specific client computer for the first time,Internet Explorer will ask you to install and run an ActiveX component (Video ViewerComponent). Follow the on screen instructions to install the component.If you have problems installing the ActiveX, please make sure first that you haveadded the server to the trusted site list of Internet Explorer.4. A welcome screen should now appear, and you will be prompted for a Login andPassword.After filling in Logon and Password you should be logged on to the WebCCTV WebApplication.‘http://192.168.100.1/’ is the factory default IP-address for the EU version ofWebCCTV. For US customers the factory default IP-address is http://192.168.0.199/.Please note that your installer could have changed it to fit the specifications of yourown network.Version 4.3 Series
