Quake Global QPRO Technical Data Sheet
                                 | |
Contents
| 
QPRO Technical Data SheetDocument 1137-0901, REV A 10manufacturers: Taoglas, Hirschmann Car Communications, and Tyco Electronics.• External GSMo GSM Serial Port - A QPRO that DOES NOT include an internal GSM module has an optionto use an RS-232 serial port to communicate with an external GSM module, or it can beused as an additional serial port with the use of a custom application. For example, the AUXPort could be used for an External GSM: Pins: 5 (Rx), 6 (Tx), and GND (Pin 9, 12, 26, or 35).Use only approved GSM antennas3.3 ORBCOMM• Internalo Performance Transmit Output Power: 5 watts Minimum, 10 watts Maximum Sensitivity -123 dBm with typical BER 1x10-5o Features Uplink (Tx)• 148-150.05 MHz• 2400 baud Downlink (Rx)• 137-138 MHz• 4800 baud Optional antenna detection• Externalo MTS Serial Port- The Main Transport Socket port; known as the MTS port, is an RS-232 portwhich implements the QUAKE Communications Protocol (QCP). For QPRO models thatsupport ORBCOMM this port also supports the Orbcomm Serial Interface (OSI). Pins: 13 (Tx), 14 (Rx), 15 (DSR), 16 (DTR), 17 (DCD), and GND (Pin 9, 12, 26, or35)Exceeding an RF input power level of +10dBm may result in damage to the receiver and will void thewarranty.Do not place ORBCOMM antennas within six feet of each other.For best results use only approved ORBCOMM antennas3.4 IRIDIUM-Short Burst Data (SBD)• Internalo Performance Transmit Output Power: 2 Wattso Features Uplink (Tx)• 1616-1626.5 MHz• 50 ksps Downlink (Rx)• 1616-1626.5 MHz• 50 kspsCONFIDENTIALInformation classified Confidential - Do not copy (See last page for obligations) |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine