Qualcast YT623105X) Instruction Manual
                         | |
OPERATIONOn/off Switch1. Move the2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).Blowing1. Before blowing, loosen leaves that are stuck to the ground using2. Hold the tubesweeping motion from side to side (Fig.3. Direct the air stream away from yourself.4. Ensure that you do not stir up any heavy objects and hurtsomething.OPERATIONOn/off Switch1. Move the2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).Blowing1. Before blowing, loosen leaves that are stuck to the ground using2. Hold the tubesweeping motion from side to side (Fig.3. Direct the air stream away from yourself.4. Ensure that you do not stir up any heavy objects and hurtsomething.OPERATIONOn/off Switch1. Move the2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).Blowing1. Before blowing, loosen leaves that are stuck to the ground using2. Hold the tubesweeping motion from side to side (Fig.3. Direct the air stream away from yourself.4. Ensure that you do not stir up any heavy objects and hurtsomething.OPERATIONOn/off Switch1. Move the2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).WARNING! The product will continue toswitched off! Wait until itBlowing1. Before blowing, loosen leaves that are stuck to the ground using2. Hold the tubesweeping motion from side to side (Fig.3. Direct the air stream away from yourself.4. Ensure that you do not stir up any heavy objects and hurtsomething.OPERATIONOn/off Switch1. Move the2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).WARNING! The product will continue toswitched off! Wait until itBlowing1. Before blowing, loosen leaves that are stuck to the ground using2. Hold the tubesweeping motion from side to side (Fig.3. Direct the air stream away from yourself.4. Ensure that you do not stir up any heavy objects and hurtsomething.OPERATIONOn/off Switch1. Move the2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).WARNING! The product will continue toswitched off! Wait until it1. Before blowing, loosen leaves that are stuck to the ground using2. Hold the tubesweeping motion from side to side (Fig.3. Direct the air stream away from yourself.4. Ensure that you do not stir up any heavy objects and hurtsomething.OPERATIONOn/off Switch1. Move the on/off switch (5) to position “1” to turn the product on (Fig. 12).2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).WARNING! The product will continue toswitched off! Wait until it1. Before blowing, loosen leaves that are stuck to the ground using2. Hold the tubesweeping motion from side to side (Fig.3. Direct the air stream away from yourself.4. Ensure that you do not stir up any heavy objects and hurtOn/off Switchon/off switch (5) to position “1” to turn the product on (Fig. 12).2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).WARNING! The product will continue toswitched off! Wait until it1. Before blowing, loosen leaves that are stuck to the ground using2. Hold the tube approximately 10 cm above the ground and walksweeping motion from side to side (Fig.3. Direct the air stream away from yourself.4. Ensure that you do not stir up any heavy objects and hurton/off switch (5) to position “1” to turn the product on (Fig. 12).2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).WARNING! The product will continue toswitched off! Wait until it1. Before blowing, loosen leaves that are stuck to the ground usingapproximately 10 cm above the ground and walksweeping motion from side to side (Fig.3. Direct the air stream away from yourself.4. Ensure that you do not stir up any heavy objects and hurton/off switch (5) to position “1” to turn the product on (Fig. 12).2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).Fig.WARNING! The product will continue toswitched off! Wait until it1. Before blowing, loosen leaves that are stuck to the ground usingapproximately 10 cm above the ground and walksweeping motion from side to side (Fig.3. Direct the air stream away from yourself.4. Ensure that you do not stir up any heavy objects and hurton/off switch (5) to position “1” to turn the product on (Fig. 12).2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).Fig.WARNING! The product will continue toswitched off! Wait until it1. Before blowing, loosen leaves that are stuck to the ground usingapproximately 10 cm above the ground and walksweeping motion from side to side (Fig.3. Direct the air stream away from yourself.4. Ensure that you do not stir up any heavy objects and hurton/off switch (5) to position “1” to turn the product on (Fig. 12).2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).Fig. 12 Fig. 13WARNING! The product will continue toswitched off! Wait until it1. Before blowing, loosen leaves that are stuck to the ground usingapproximately 10 cm above the ground and walksweeping motion from side to side (Fig.3. Direct the air stream away from yourself.4. Ensure that you do not stir up any heavy objects and hurton/off switch (5) to position “1” to turn the product on (Fig. 12).2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).12 Fig. 13WARNING! The product will continue toswitched off! Wait until it comes to a complete stop before putting the product down!1. Before blowing, loosen leaves that are stuck to the ground usingapproximately 10 cm above the ground and walksweeping motion from side to side (Fig.3. Direct the air stream away from yourself.4. Ensure that you do not stir up any heavy objects and hurton/off switch (5) to position “1” to turn the product on (Fig. 12).2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).12 Fig. 13WARNING! The product will continue tocomes to a complete stop before putting the product down!1. Before blowing, loosen leaves that are stuck to the ground usingapproximately 10 cm above the ground and walksweeping motion from side to side (Fig.3. Direct the air stream away from yourself.4. Ensure that you do not stir up any heavy objects and hurton/off switch (5) to position “1” to turn the product on (Fig. 12).2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).12 Fig. 13WARNING! The product will continue tocomes to a complete stop before putting the product down!1. Before blowing, loosen leaves that are stuck to the ground usingapproximately 10 cm above the ground and walksweeping motion from side to side (Fig.3. Direct the air stream away from yourself.4. Ensure that you do not stir up any heavy objects and hurton/off switch (5) to position “1” to turn the product on (Fig. 12).2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).12 Fig. 13WARNING! The product will continue tocomes to a complete stop before putting the product down!1. Before blowing, loosen leaves that are stuck to the ground usingapproximately 10 cm above the ground and walksweeping motion from side to side (Fig.3. Direct the air stream away from yourself.4. Ensure that you do not stir up any heavy objects and hurton/off switch (5) to position “1” to turn the product on (Fig. 12).2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).12 Fig. 13WARNING! The product will continue tocomes to a complete stop before putting the product down!1. Before blowing, loosen leaves that are stuck to the ground usingapproximately 10 cm above the ground and walksweeping motion from side to side (Fig. 14).3. Direct the air stream away from yourself.4. Ensure that you do not stir up any heavy objects and hurton/off switch (5) to position “1” to turn the product on (Fig. 12).2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).12 Fig. 13WARNING! The product will continue to work for some timecomes to a complete stop before putting the product down!1. Before blowing, loosen leaves that are stuck to the ground usingapproximately 10 cm above the ground and walk14).3. Direct the air stream away from yourself.4. Ensure that you do not stir up any heavy objects and hurton/off switch (5) to position “1” to turn the product on (Fig. 12).2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).12 Fig. 13work for some timecomes to a complete stop before putting the product down!1. Before blowing, loosen leaves that are stuck to the ground usingapproximately 10 cm above the ground and walk14).Fig. 143. Direct the air stream away from yourself.4. Ensure that you do not stir up any heavy objects and hurt17on/off switch (5) to position “1” to turn the product on (Fig. 12).2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).12 Fig. 13work for some timecomes to a complete stop before putting the product down!1. Before blowing, loosen leaves that are stuck to the ground usingapproximately 10 cm above the ground and walkFig. 144. Ensure that you do not stir up any heavy objects and hurton/off switch (5) to position “1” to turn the product on (Fig. 12).2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).12 Fig. 13work for some timecomes to a complete stop before putting the product down!1. Before blowing, loosen leaves that are stuck to the ground usingapproximately 10 cm above the ground and walkFig. 144. Ensure that you do not stir up any heavy objects and hurton/off switch (5) to position “1” to turn the product on (Fig. 12).2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).12 Fig. 13work for some timecomes to a complete stop before putting the product down!1. Before blowing, loosen leaves that are stuck to the ground usingapproximately 10 cm above the ground and walk4. Ensure that you do not stir up any heavy objects and hurton/off switch (5) to position “1” to turn the product on (Fig. 12).2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).12 Fig. 13work for some timecomes to a complete stop before putting the product down!1. Before blowing, loosen leaves that are stuck to the ground usingapproximately 10 cm above the ground and walk4. Ensure that you do not stir up any heavy objects and hurton/off switch (5) to position “1” to turn the product on (Fig. 12).2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).12 Fig. 13work for some timecomes to a complete stop before putting the product down!1. Before blowing, loosen leaves that are stuck to the ground usingapproximately 10 cm above the ground and walk4. Ensure that you do not stir up any heavy objects and hurton/off switch (5) to position “1” to turn the product on (Fig. 12).2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).12 Fig. 13work for some time even after the motor has beencomes to a complete stop before putting the product down!1. Before blowing, loosen leaves that are stuck to the ground usingapproximately 10 cm above the ground and walk4. Ensure that you do not stir up any heavy objects and hurton/off switch (5) to position “1” to turn the product on (Fig. 12).2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).12 Fig. 13even after the motor has beencomes to a complete stop before putting the product down!1. Before blowing, loosen leaves that are stuck to the ground usingapproximately 10 cm above the ground and walksomebody oron/off switch (5) to position “1” to turn the product on (Fig. 12).2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).12 Fig. 13even after the motor has beencomes to a complete stop before putting the product down!1. Before blowing, loosen leaves that are stuck to the ground usingapproximately 10 cm above the ground and walksomebody oron/off switch (5) to position “1” to turn the product on (Fig. 12).2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).12 Fig. 13even after the motor has beencomes to a complete stop before putting the product down!1. Before blowing, loosen leaves that are stuck to the ground usingapproximately 10 cm above the ground and walk slowly forward using asomebody oron/off switch (5) to position “1” to turn the product on (Fig. 12).2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).12 Fig. 13even after the motor has beencomes to a complete stop before putting the product down!a broom or rake.slowly forward using asomebody oron/off switch (5) to position “1” to turn the product on (Fig. 12).2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).12 Fig. 13even after the motor has beencomes to a complete stop before putting the product down!a broom or rake.slowly forward using asomebody oron/off switch (5) to position “1” to turn the product on (Fig. 12).2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).even after the motor has beencomes to a complete stop before putting the product down!a broom or rake.slowly forward using asomebody or damageon/off switch (5) to position “1” to turn the product on (Fig. 12).2. Move the on/off switch (5) to position “0” to turn the product off (Fig. 13).even after the motor has beencomes to a complete stop before putting the product down!a broom or rake.slowly forward using adamageeven after the motor has beencomes to a complete stop before putting the product down!a broom or rake.slowly forward using adamageeven after the motor has beencomes to a complete stop before putting the product down!a broom or rake.slowly forward using adamageeven after the motor has beencomes to a complete stop before putting the product down!a broom or rake.slowly forward using adamageeven after the motor has beenslowly forward using aeven after the motor has beenslowly forward using aslowly forward using a |
Related manuals for Qualcast YT623105X)
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine