Qualstar RLS-8350 Installation And Operation Manual

Also see for RLS-8350: Technical & service manual Product specification

Contents

Qualstar RLS-8350 Installation And Operation Manual Manual pdf 31 page image

FuseFuse HolderFuse Holder flush with AC power receptacleFigure 3-3 Fuse Holder on rear of LibraryWhenever you pull out the fuse holder and push it back in order to replace or checkthe fuse, be sure to push it to the point where the AC power receptacle and the fuseholder are flush with each other.3.3.3 Power CordThe supplied detachable power cord complies with the following specifications:• 100-120 voltapplicationsUL listed and CSA certified three-conductor 18 AWG SJT vinyl-jacketed cord. One end is terminated with an IEC 320 C13 styleconnector. The other end is terminated with a NEMA 5-15P type plug.• 200-240 voltapplicationsHarmonized three-conductor HO5VV F3G 1.0mm vinyl-jacketed cord.One end is terminated with an IEC 320 C13 style connector. The otherend is terminated with the European CEE7 Standard VII type plug.3.4 Temperature, Humidity and AltitudePARAMETER OPERATING NON-OPERATING{Ambient temperature +5°C to +32°C(+41°F to +90°F)-20°C to +60°C(-4°F to +140°F)Temperature gradient(maximum)1°C°/minute, 10°C/hour(2°F/minute, 18°F/hour)1°C/minute, 20°C/hour(2°F/minute, +36°F/hour)Relative humidity(non-condensing)20% to 80% 10% to 90%Wet bulb temperature 26°C (79°F) maximum 29°C (84°F) maximumAltitude -1000 to +10,000 feet-304.8 to +3,048 meters-1000 to + 40,000 feet-304.8 to +12,192 meters{ Includes tape drivesTable 3-5 Environmental Specifications511000 Rev. F Specifications 3-5