Qualstar XLS Series Site Planning Manual

Also see for XLS Series: Technical & service manual Installation manual

Qualstar XLS Series Site Planning Manual Manual pdf 17 page image

XLS Library Site Planning Guide 113 Installing the LibraryEnsure that the proposed installation location meets the requirements for the following:• Floor space, floor loading, and service access requirements. See Section 3.1.• Environmental specifications. See Section 3.2 on page 3-18.• Power. See Section 3.3 on page 3-18.• Cooling. See Section 3.4 on page 3-21.3.1 Floor Space and Floor LoadingThis section lists the floor space, floor loading, and service access requirements for thefollowing hardware:• XLS-8161100. See Section 3.1.1 on page 3-2• XLS-832700. See Section 3.1.2 on page 3-5.• XLS-820500. See Section 3.1.3 on page 3-8.• XLS-812300, including any expansion pods. See Section 3.1.4 on page 3-11.• XLS-89000 Media Expansion Module (MEM). See Section 3.1.5 on page 3-13.• XLS-85000 Media Expansion Module (MEM). See Section 3.1.5 on page 3-13.Before moving the XLS to its final destination, ensure that there is adequate floor spaceavailable and that the floor is capable of holding the equipment’s weight.Important: Be sure to leave adequate space behind the library and anyattached MEMs to allow for service access to the followingcomponents:• Power/PC bay (includes the power switch and connector,power supplies, battery module, system controllercomponents, and cooling fans)• Tape drives• Any equipment mounted in the optional equipment rackWhen extended, the power/PC bay requires 12 inches (31cm) of space.