Quanmax KEEX-2010 User Manual

Contents

Quanmax KEEX-2010 User Manual Manual pdf 79 page image

Overview 5-3KEEX-2010 Series User GuideX OverviewThis chapter provides information on installing the necessary drivers for the KEEX-2010. The followingsections describe driver installation procedures for Windows operating systems. Download the drivers fromthe Quanmax website and install them in the order they are listed below. For other operating systems, pleasecontact Quanmax.Note: Driver downloads and additional information are available underDownloads on our web site: www.quanmax.com.X Chipset Driver InstallationInstall the graphics driver by running the file “setup.exe” in VIA_HyperionPro_KEEX-2010.zip. Afterinstallation is complete, reboot the system.X Graphics Driver InstallationInstall the graphics driver by running the file “setup.exe” in Graphics_KEEX-2010.zip. After installation iscomplete, reboot the system.X LAN Driver InstallationDownload and extract the contents of LAN_KEEX-2010.zip. Install the Marvell LAN Driver (version7.24.1.3) by using the Windows"Device Manager". Select the Ethernet controller marked with an exclamationmark (“!”) under "Other Devices" and install the appropriate driver for your operating system.X Audio Driver Installation (optional)If you are using the optional KEDB-1000 Audio Daughter Board, download and extract the contents ofAudio_KEDB-1000.zip. Install the driver by running "WDM_R189.exe”. After installation is complete, rebootthe system.