Quanmax QBOX-200S Series User Manual

Also see for QBOX-200S: User guide

Contents

Quanmax QBOX-200S Series User Manual Manual pdf 6 page image

Safety Instructions6QBOX-200S Series User’s Manual When Working Inside a ComputerBefore taking covers off a computer, perform the following steps:1. Turn off the computer and any peripherals.2. Disconnect the computer and peripherals from their power sources orsubsystems to prevent electric shock or system board damage. This does notapply when hot swapping parts.3. Follow the guidelines provided in “Preventing Electrostatic Discharge” on thefollowing page.4. Disconnect any telephone or telecommunications lines from the computer.In addition, take note of these safety guidelines when appropriate: To help avoid possible damage to system boards, wait five seconds afterturning off the computer before removing a component, removing a systemboard, or disconnecting a peripheral device from the computer. When you disconnect a cable, pull on its connector or on its strain-relief loop,not on the cable itself. Some cables have a connector with locking tabs. If youare disconnecting this type of cable, press in on the locking tabs beforedisconnecting the cable. As you pull connectors apart, keep them evenlyaligned to avoid bending any connector pins. Also, before connecting a cable,make sure both connectors are correctly oriented and aligned.CAUTIONDo not attempt to service the system yourself except as explained in thisuser’s guide. Follow installation and troubleshooting instructions closely.