Replacing The Battery1. Identify location A and B on the diagram to access battery,press pin A towards B, and pull out the battery holder.2. Remove the old battery, then insert the new battery into the batteryholder with the + side facing upwards. Lithium battery (Cr2025)3. Push the battery holder back into its place until it locks firmly in place.Note:To prevent leakage of fluid from the lithium battery, remove the battery when not using the remote control unit for long periods oftime (one month or more). If the battery leaks fluid, carefully wipe it out of the battery case, then change with a new lithium battery.Basic Operation1. Power on /offPress the “Power on /off” button on remote control to turn power on. Press button again to turn off the unit.2. PLAY/PAUSEOn normal play disc mode, press “PLAY/PAUSE” button to pause. Press button again to continue playing.3. STOPIn play mode, press “STOP” button to stop play. Press “PLAY” button to resume playing.4. DISC IN /OUTPress the “EJECT” button to eject disc. Insert disc into disc slot until unit automatically retrieves disc.5. MUTE ControlPress “MUTE” button on remote control to turn off the sound. Pressing it again will resume play at the previous volume level.Note: Some functions do not work during mute operation.6. Function mode switch:Press “MODE” button to toggle through different audio/video sources.Note: If no source is available, radio will not toggle through modes.7. Press “I< or >I ” In DVD mode, short-press for previous/next item, long-press for fast forward/fast back; In TV mode, short-pressfor previous/next channel, long-press for manual search forward up/down; In FM mode, short-press to adjust radio frequency,long-press for manual search forward up/down.8. OSD:Press the “OSD” remote control key, the screen will display elapsed time, remaining time, title, chapter, section time,time remaining chapters.- 9 - www.quantumaudio.net