780C Multi-Interface Interoperability Tester – User Guide Page 21September 29, 2014 Revision A14.1.2 Connecting the 780C to the Display Device - HDBaseTUse the following procedures to make the physical connections from the 780C to the display device under test.1. Make the cable connection between the appropriate the 780C video HDBaseT output connector and theinput connector of the HDBaseT device.The following illustrations depict the typical test configurations.4.1.3 Connecting the 780C to the Display Device - SDIUse the following procedures to make the physical connections from the 780C to the display device under test.1. Make the cable connection between the appropriate the 780C video SDI output connector and the inputconnector of the display or monitor using the cables supplied.
