Quantum P7000 Unpacking Instructions Manual

Also see for P7000 Series: Warranty User guide addendum User guide

Contents

Quantum P7000 Unpacking Instructions Manual Manual pdf 7 page image

Quantum ATL P7000 Unpacking InstructionsDocument 6434006-02, Ver. 2, Rel. 0August 2002Unpacking the Library 7• Keep the library power cord plugged into a grounded poweroutlet except when working with AC electrical components.• Avoid contact with power supplies, EMI filters, and AC electricalcomponents while the library is connected to a power outlet.• Use an antistatic wrist strap.• Keep static-sensitive parts in their original shipping containersuntil ready for installation.• Do not place static-sensitive parts on a metal surface. Place theminside their protective shipping bag or on an antistatic mat.• Avoid touching connectors and other components.Unpacking the Library 0This section explains how to unpack the library and move it to its finalinstallation location. The ATL P7000 is shipped in packing materialsdesigned to protect it from damage during transit. By following theseinstructions, you help ensure that the library will continue to besafeguarded after it arrives at the installation site.The following are the major steps in this procedure:• Receiving the library• Unboxing the library• Positioning the library• Unpacking the library• Leveling the libraryReceiving the Library 0 Unpack the library as close to the installation site as possible. Inspectthe shipping pallet and carton for damage that may have occurredduring shipment. Report any damage to the shipper.Note: Dry climates and cold-weather heating environments havelower relative humidity and are more likely to produce staticelectricity.Caution: The ATL P7000 with 16 DLT7000 tape drives weighsapproximately 1444 pounds (656 kg). Use at least twopeople to move and install the library.