Quantum QXS-424 Drive Rackmount Install Manual

Also see for QXS-312: Setup guide Getting started guide Site planning guide Site planning guide

Contents

Quantum QXS-424 Drive Rackmount Install Manual Manual pdf 16 page image

Install and Secure the QXS-412/424 ChassisQX and QXS 12- and 24-Drive Rackmount Install Guide 1610. Tighten the screws that you loosely attached in Step 3.Figure 15: Tightening rail screws11. Repeat steps 1, 2, and 3 for the other side of the chassis.Continue to Install the QXS Chassis >>* Back to Checklist:QXS Chassis Installation **Back to Checklist: System Installation *Install and Secure the QXS-412/424 Chassis1. Carefully lift/align the chassis and slide it into the rack. Ensure that the chassis is level.Caution:l Rails might bend if the chassis is not level when inserted.l Replace the rail if it becomes deformed as a result of inserting the chassis in an unlevel positionduring installation.