Quantum SuperLoader 3A Series Quick Start Manual

Also see for SuperLoader 3A Series: Warranty Quick start guide User guide Supplement sheet User guide

Contents

Quantum SuperLoader 3A Series Quick Start Manual Manual pdf 3 page image

Preparing for the Installation 3SuperLoader 3A SeriesTaking ESD Precautions 0Some components within the autoloader contain static-sensitive parts. To avoid damagingthese parts while performing installation procedures, always observe the followingprecautions:• Ensure that the work area is free from conditions that could cause electrostaticdischarge (ESD).• Discharge static electricity from your body by touching a known grounded surface,such as your computer's metal chassis.• Keep the autoloader turned off during all installation procedures.• Use an antistatic wrist strap.• Keep static-sensitive parts in their original shipping containers until ready forinstallation. Look for the ESD sticker to identify static sensitive parts.• Avoid touching connectors and other components.Preparing for RackMounting 0 The autoloader can be rack mounted by attaching it directly to stationary cabinet rails.Take the following general safety steps before beginning the rack-mount installation.1 Lower the cabinet feet.2 Extend the cabinet anti-tip device, if available.3 Ensure that the cabinet and all rack mounted equipment have a reliable groundconnection.4 Verify that the total current of all rack mounted components (including theautoloader) will not exceed the current rating of the power distribution unit or outletreceptacles.5 Secure the help of at least one other person. At least two people are required to safelyinstall the autoloader into a rack cabinet.Note: Dry climates and cold-weather heating environments have lower relativehumidity and are more likely to produce static electricity.Note: An anti-tip device may be extendable legs or similar equipment used tostabilize the cabinet. This anti-tip equipment is to help avoid over-balancing the cabinet when installing or removing equipment.Warning: Failure to take these safety steps may result in personal injury orequipment damage.