UMTS/HSPA Module SeriesUC20 Hardware DesignUC20_Hardware_Design Confidential / Released 67 / 84GNSS tracking current is tested in the following conditions: For Cold Start, 10 minutes after First Fix. For Hot Start, 15 seconds after First Fix.6.5. RF Output PowerThe following table shows the RF output power of UC20 module.Table 34: Conducted RF Output PowerFrequency Max. Min.UMTS 1900 22.5dBm+1/-1dB <-50dBmUMTS 850 22.5dBm+1/-1dB <-50dBm6.6. RF Receiving SensitivityThe following table shows the conducted RF receiving sensitivity of UC20 module.Table 35: Conducted RF Receiving SensitivityFrequency Receive Sensitivity (Typ.)UMTS 1900 -110dBmUMTS 850 -110dBm6.7. Electrostatic DischargeThe module is not protected against electrostatics discharge (ESD) in general. Consequently, it is subjectto ESD handling precautions that typically apply to ESD sensitive components. Proper ESD handling andpackaging procedures must be applied throughout the processing, handling and operation of anyapplication that incorporates the module.The following table shows the module electrostatics discharge characteristics.
