Quest Engineering DRY 115 Installation, Operation And Maintenance Instructions

Contents

Quest Engineering DRY 115 Installation, Operation And Maintenance Instructions Manual pdf 4 page image

1-800-533-7533Quest DRY 115 Installation, Operation and Maintenance Instructions4 www.QuestProtect.comsales@QuestProtect.comquestquest1. SpecificationsPart Number: 4027110Power: 2 Circuits; 11Amps, 115VAC each22 Amps total power consumptionKilowatts: 2.5 (63 KWh/Day)Capacityper Day: 115 Pints (80°F 60%RH)Blower: 385 CFM Process Ariflow @ 0” ESP75 CFM Reactivation Airflow @ 0”ESPTemperatureRange: 10°F to 140°F*Filters: Process Filter Size: 16” X 20” X 2”Reactivation Filter Size: 12” X 12” X 1”ReactivationDuct: 6” (Start collars included)ProcessDuct: 8” (Start collars included)Range: 10°F to 140°F*Warranty: 1 Year Parts and Labor*Low temperature performance is dependent on reactivation air source. Supplying warmer reactivationair will significantly increase water removal.Dimensions :Unit ShippingWidth 20” 25”Height 36” 47”Depth 20” 24”Weight 105 Lb 125 LbAccessories:4026859 6” Metalized Polyester Flex-Duct 25’ (for Reactivation)4020128 6” Insulated Flex-Duct 25’ (for Reactivation)4027198 Low Voltage Control KitProcess Air Fiter Replacement:4021475 16” x 20” x 2” MERV 11 Filter (Standard)4024969 16” x 20” x 2” MERV 6 Filter (Optional)Reactivation Air Filter Replacement:4026860 12” x 12” x 1” MERV 7 Filter