QuietCool QC18DVS Owner's Manual
             | |
41.0 Introduction Your QuietCool was engineered to be the most efficient portable evaporative cooler manufactured. It wasmanufactured and assembled at our plant in Houston, Texas. Your QuietCool was tested 3 ways. Your unit was tested for 1. Maximum air flow at operating static pressure.Only QuietCool is tested in operating conditions with 2. Water and 3. Electricity before it is shipped. QuietCool is easy to operate – needs only tap water and electricity to operate. QuietCool is easy to move – roll your QuietCool to the area you want to cool. QuietCool comes standard withstraight and swivel / lock casters which make moving your QuietCool a breeze.1.1 Quick Start – Your Quick Start Information is located inside theinformation packet shipped with your unit.Look on the front of your QuietCool packaging in a plastic sleeve.1.2 Evap-O-Matic Tablet – Chemical Water Treatment. Operate your unitfor 2 weeks – then, flush out old water – add clean water – then add ½Chemical Water Treatment tablet. Note: Tablet makes water foam whichcan cause unit to spray water temporarily (for a day or two).2.0 How Evaporative Cooling WorksKeeping in mind that regular fans only circulate same temperature air -same humidity – your QuietCool portable evaporative cooler takes thatsame existing air, combines it with evaporating water (whichdramatically lowers the temperature) immediately relieving hot, dryareas, similar to the conditions when a natural rain storm approaches, the temperature drops noticeably cooler, because theair is saturated with water. Because your air is now saturated with water it becomes noticeably cooler. In high humidity areasthe temperature will not be as cool – however, the QuietCool was engineered efficient to evaporate perspiration and sweatfrom employees to keep them cooler.3.0 Unpacking your new QuietCool unitNote: Carefully examine your QuietCool shipping carton for damagebefore opening. If your carton is damaged – notify the shipper immediately!Your QC18” unit was shipped strapped a wooden pallet inside a cardboard box.First remove the straps then you may open the cardboard box. Your QuietCoolcomes with a box of casters. Attach swivel casters to fan side of unit and straightcasters to pad side. Use a 3/8” wrench to attach casters.4.0 Set-up your QuietCool unit.Roll your QuietCool unit to a level surface and lock the swivel casters to preventaccidental movement.4.1 Connecting the electrical supplyElectrical cord for 120V, 15Amp connection.Note: Standard ¾” water connection forutility water source under 60 p.s.i. |
Related manuals for QuietCool QC18D3
manualsdatabase
Your AI-powered manual search engine